I think I have killed my Mag 254

Welder1977

New member
CSVipshare User
#1
Hi all, hope someone can help. I stupidly played about with the settings before reading up on the receiver. It keeps telling me Wrong image so I went into BIOS setting an changed it to NAND but is still wouldn't boot up, same problem wrong image, TPFT load but would not load. So I then tried a factory reset which has no left me with a blue screen and I'm still getting wrong image message. Is there a way I can re install the image etc??
Cheers
Mark
 

EuropeIPTV

New member
CSVipshare User
#2
1. Download 2 files
You do not have permission to view link Log in or register now.

You do not have permission to view link Log in or register now.

2. On USB-drive, the file system FAT32, create a directory
mag250
3. Put files bootstrap and imageupdate to directory mag250 on USB flash
WARNING! This files must be named as
bootstrap
imageupdate
withoit extension!
4. Put your USB flash to rear USB connector on STB.
5. Unplug power of STB. Press and hold “Menu” button on RC (direct your RC to STB).
Plug power on STB with holding “Menu” button. Hold “Menu” button during 10 seconds.
You can see BIOS menu of STB.
6. Select “Upgrade Tools”, pressing enter on the remote control to the right
7. Select “USB Bootstrap”
8. Connect the USB flash drive and click OK to confirm the beginning of the update process
9. Wait for the update, STB will reboot.
 

Welder1977

New member
CSVipshare User
#3
still having issues

Hi Thanks for the reply. I have copied the files to a usb stick as directed made a folder mag250, but when I try and install it, my Mag 254 tells me that
"file mag254/imageupdate not present" ??
any more ideas please?
Thanks
Mark
 

Welder1977

New member
CSVipshare User
#9
OK it has loaded from this stick! :) writes the image to flash, Writing image to flash successful, Then I get black screen, the again Wrong Image?
Thanks
 

friend

New member
CSVipshare User
#12
1. Download 2 files
You do not have permission to view link Log in or register now.

You do not have permission to view link Log in or register now.

2. On USB-drive, the file system FAT32, create a directory
mag250
3. Put files bootstrap and imageupdate to directory mag250 on USB flash
WARNING! This files must be named as
bootstrap
imageupdate
withoit extension!
4. Put your USB flash to rear USB connector on STB.
5. Unplug power of STB. Press and hold “Menu” button on RC (direct your RC to STB).
Plug power on STB with holding “Menu” button. Hold “Menu” button during 10 seconds.
You can see BIOS menu of STB.
6. Select “Upgrade Tools”, pressing enter on the remote control to the right
7. Select “USB Bootstrap”
8. Connect the USB flash drive and click OK to confirm the beginning of the update process
9. Wait for the update, STB will reboot.
hi

link inactive ...

please i need help .. with link ON ..
 
Top